How do I clear a blockage on my Cordless Blower Vac

Overview

Blockages in a Cordless Blower Vac can reduce suction power, airflow, or overall performance. Most blockages can be cleared using the built-in clearing function on the machine.

For safety reasons, the correct clearing procedure must always be followed. Protective gloves and safety goggles should be worn at all times during this process.

Step-by-Step Guide – Clearing a Blockage

Step 1: Put on Protective Equipment

• Wear protective gloves.
• Wear safety goggles before starting any blockage removal process.

1. Step 2: Prepare the Machine

   • Switch the machine on.
   • Set the speed to maximum setting (5).
   • Remove the collection bag from the unit.

2. Step 3: Use the Clearing Lever

   • Locate the black lever on the left side of the machine.
   • Move the lever back and forth repeatedly.
   • This action helps dislodge and clear the internal blockage.
   • Continue until normal airflow is restored.

3. Step 4: Confirm the Blockage is Cleared

   • Check that airflow has returned to normal.
   • Ensure no debris remains restricting the system.
   • Reattach the collection bag if required.

4. Important Safety Warning

   ⚠️ DO NOT ATTEMPT TO REMOVE ANY BLOCKAGES BY HAND

   • Never insert hands or tools into the machine.
   • Internal components may move suddenly and cause injury.
   • Always use the designated clearing lever only.

5.