Core Service

This article covers the starting and setting up of your petrol chainsaw. Always test the chain brake before using your saw and periodically while on th...

This article will go over the soft fixes you can take if your engine is not working correctly. Fuel Age and Ratio Check Please ensure that you are ...

If the engine is running fast (revving high): Please check the throttle cable is not damaged, and make sure there are no kinks found in it. Also, make...

This article covers the checks you can do if your chainsaw is not idling. If the engine is not running at idle speed and cuts out when you release the t...

This article covers the soft fixes you can take if you chainsaw is not revving up. If you are unable to do this procedure, then you could order a replac...

This article will cover the soft fixes if the chain on your chainsaw is not moving. If the chain is not moving when you rev the engine: If the chain...

This article will cover the soft fixes you can perform if your Petrol Chainsaw is not lubricating correctly TABLE OF CONTENTS Basic Checks Checking C...

If your pull cord fails to retract, or it has snapped, you will most likely need to replace the whole 'starter assembly'. Please contact our hel...

In the event that the ignition switch will not stop the saw, pull the choke control out and engage the chain brake to stop the engine.  If the ignition ...

This article will cover the soft fixes you can perform if your chain is not tensioning correctly. TABLE OF CONTENTS For the Sovereign/Challenge PCS38Z...