This article covers the adjusting of the handles on an S3644X2CR cordless lawnmower.


The height of the handle can be made higher or lower. This is done by releasing the fixings at the bottom of the handle.  You then gently disengage the two cam locks which have a serrated edge (or teeth) and re-set the handle accordingly. Once fixed, secure in place by re-locking the two fixings (see below arrows)

 

 

 

 

  1. First, release these locking levers/fixings.                      
  2. Then gently disengage the two serrated cam locks and set the handle to the required height.
  3. Finally, lock this back into position by placing the cam locks together and pushing the locking lever back down.


If after performing the above checks you are still having an issue with your product please don't hesitate to reach out to our team via our live chat.